Visqueen Axiom Liquid Range

Published August 21, 2018

Axiom Creteseal – 

A high performance structural concrete expansion joint sealant
A unique one component polyurethane & silylated PU technology
Easy to apply even at low temperatures
Accommodates up to 50% joint movement
Remains elastic <0oC

Visqueen Axiom CreteSeal is a low modulus structural concrete expansion joint sealant. The formulation contains both PU and silylated-PU technology resulting in a sealant which includes the best of both technologies and is easy to apply even at temperatures. It has been modified in order to give enhanced thixotropic properties.

CreteSeal cures by reaction with atmospheric humidity to produce a joint sealant with a 50% joint movement accommodation factor. Additionally, the CreteSeal has been modified in order to have extrusion profile identical to hybrid PU or MS technology. The extrusion rate and tooling of the sealant remain the same throughout a very wide range of temperature and humidity conditions.

CreteSeal is supplied in a 600ml sausage with 24 per box.

Axiom Guard –

New liquid technology giving superior performance
No complicated pre-mixing
Formulated grade for below ground applications
Excellent weather & UV resistance
Fast curing, elastic & flexible at extreme temperatures

Visqueen Axiom Guard is a unique single component polyurethane liquid membrane incorporating an accelerator that upon contact with humidity cures rapidly to give a continuous fully bonded waterproofing coating.

Surface coverage is approximately 1.5kg/m² therefore. The product is available in 15 kilo (1 tin overs 10m²) tins in two options:

– Visqueen Axiom Guard H+ for horizontal surfaces.

– Visqueen Axiom Guard V+ specially formulated for vertical surfaces. Visqueen recommend 2 coats in this application therefore to aid installation we offer 2 colours – white (1st coat) and grey (2nd coat). The use of a two colour system allows the easy identification of any areas that have been missed with the second coat.

Visqueen Axiom Primer –

New liquid technology giving superior performance
Highly penetrative formulation
Suitable for most surfaces including for green concrete
Quick & easy to apply
Part of the Visqueen Axiom Guard waterproofing system

Visqueen Axiom Guard Primer is a one component, polyurethane based primer suitable for all substrates. The highly penetrative formulation seals and primes surfaces prior to the use of Visqueen Axiom Guard liquid waterproofing system.

It is characterised by its very low viscosity and balanced curing speed which result in excellent wetting, impregnation and paint-over time on all substrates, whether of high, low or no porosity (e.g. glass and metals). Do not over apply and allow to puddle.

The product is supplied in a 4Kilo tin.

Axiom Shield LAC – 

New liquid technology giving superior performance
High performance vapour barrier and waterproofing membrane
Quick & easy to apply; fast installation
Excellent coverage rates

Visqueen Axiom Shield is an easy to use, high performance liquid membrane which rapidly dries to form a damp and waterproof membrane.

Visqueen Axiom Uniseal

New liquid technology giving superior performance
Perfect for detailing irregular profiles and penetrations
Creates a fillet in just one pass – NO Complicated build-ups
Fast curing, elastic & flexible at extreme temperatures
Compliments Visqueen’s self-adhesive waterproofing membranes
Formulated for masonry applications including blockwork

Visqueen Ultimate UniSeal is a two part system: the first component a bitumen-extended polyurethane fluid with a secondary part an accelerator hardener.

This unique system cures rapidly to give a continuous tough rubber-like, fully bonded waterproofing coating for various applications.

The 2 part system is available in one 15.6 kilo or 5.2 kilo tin