Published July 03, 2017
NILOBOARD is a tough, semi flexible board, for protecting waterproofing applications on bridge and parking garage decks, terraces, tunnels, foundation walls and slabs, and wet room floors against construction traffic, other trades and impact of back fill soil.
The surface to receive the NILOBOARD protection board has normally been waterproofed. The waterproofed surface must be clean, free of any debris, or sharp protrusions.
Apply NILOBOARD protection board directly on the waterproofing membrane as soon as practicable.
Butt together all NILOBOARD protection board panels and cut to fit all intersecting and protruding surfaces. Cover joints with joint tape if desired. Ensure subsequent ballast layers are applied as soon as possible following protection board application.
Apply in stages starting from bottom of the wall and continuing to the height of backfill level.
NILOBOARD is supplied in sheets 1m x 2m in standard thicknesses 3mm, 4mm, 5mm and 6mm. Boards should be kept stored in pallets placed on level surfaces under shade or cover. Stack no
more than two pallets high.
Niloboard 3mm – 225 boards per pallet
Niloboard 4mm – 150 boards per pallet
Niloboard 5mm – 125 boards per pallet
Niloboard 6mm – 100 boards per pallet
This product is available from Mid July 2017
Please get in contact with Miers to enquire 01480 702 222